Attributes
| Series Code | BLADE |
|---|---|
| Category Path | Assembly Equipment And Accessories |
Variations (16)
BLADE-SER250
| Outside Dia. | 250 mm |
|---|---|
| Inside Dia. | 40 mm |
| Thickness | 3 mm |
BLADE-SER350
| Outside Dia. | 350 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 3 mm |
BLADE-SER400
| Outside Dia. | 400 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 4 mm |
BLADE-SER520
| Outside Dia. | 520 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 4 mm |
BLADE-SMT250
| Outside Dia. | 250 mm |
|---|---|
| Inside Dia. | 40 mm |
| Thickness | 3 mm |
BLADE-SMT350
| Outside Dia. | 350 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 3 mm |
BLADE-SMT400
| Outside Dia. | 400 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 4 mm |
BLADE-SMT520
| Outside Dia. | 520 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 4 mm |
BLADE-DIA165
| Outside Dia. | 165 mm |
|---|---|
| Inside Dia. | 20 mm |
| Thickness | 1.4 mm |
BLADE-DIA250
| Outside Dia. | 250 mm |
|---|---|
| Inside Dia. | 40 mm |
| Thickness | 3 mm |
BLADE-DIA350
| Outside Dia. | 350 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 3 mm |
BLADE-DIA400
| Outside Dia. | 400 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 4 mm |
BLADE-DIA520
| Outside Dia. | 520 mm |
|---|---|
| Inside Dia. | 50 mm |
| Thickness | 4 mm |
BLADE-DIA650
| Outside Dia. | Outside Dia. N/A |
|---|---|
| Inside Dia. | Inside Dia. N/A |
| Thickness | Thickness N/A |
BLADE-SMT650
| Outside Dia. | Outside Dia. N/A |
|---|---|
| Inside Dia. | Inside Dia. N/A |
| Thickness | Thickness N/A |
BLADE-SER650
| Outside Dia. | Outside Dia. N/A |
|---|---|
| Inside Dia. | Inside Dia. N/A |
| Thickness | Thickness N/A |
Specifications
| Brand | Kuriyama |
|---|---|
| Type | Serrated Replacement Blade |
| Cautionary Statements | Blade sharpening should only be performed by the blade manufacturer. (Contact Kuriyama Customer Service for sharpening service details.) Ensure direction of blade rotation is correct as indicated by the arrow printed on the blade. When using a new blade or newly sharpened blade, make initial hose cuts at a low speed. A newly sharpened blade will cut very quickly, which at a high speed could lead to overheating, potentially damaging the blade. Do not operate at excessive speeds that could potentially overwork the motor. Do not move or rotate the hose during cutting. Do not apply any solvents or lubricants to the blade. When replacing the blade inspect for signs of wear, that the shaft rotates without vibrations and that the blade is perfectly perpendicular to the cutting surface. Before starting, actuate the hose pressing lever to ensure no interferences. |
PDF Documents
No PDF documents.