Endure Dot Air Brake Fittings

DOT-BRMRTS Series Swivel Male Run Tee Fittings

Scraped SKU: dot-brmrts-series-swivel-male-run-tee-fittings 2026-06-12 16:03:30

Attributes

Series CodeDOT-BRMRT
Category PathEndure Dot Air Brake Fittings

Variations (9)

DOT-BRMRTS-0402

Tube OD1/4 in
Tube ID0.165 in
D1 NPTF1/8 in
D20.472 in
L10.335 in
L20.835 in
L31.850 in
Hex1/2 in
Weight Each0.064 lb
Pieces per Package25

DOT-BRMRTS-0404

Tube OD1/4 in
Tube ID0.165 in
D1 NPTF1/4 in
D20.472 in
L10.512 in
L21.031 in
L31.850 in
Hex9/16 in
Weight Each0.075 lb
Pieces per Package25

DOT-BRMRTS-0406

Tube OD1/4 in
Tube ID0.165 in
D1 NPTF3/8 in
D20.472 in
L10.512 in
L21.051 in
L31.850 in
Hex11/16 in
Weight Each0.091 lb
Pieces per Package25

DOT-BRMRTS-0604

Tube OD3/8 in
Tube ID0.244 in
D1 NPTF1/4 in
D20.630 in
L10.512 in
L21.122 in
L32.126 in
Hex11/16 in
Weight Each0.134 lb
Pieces per Package25

DOT-BRMRTS-0606

Tube OD3/8 in
Tube ID0.244 in
D1 NPTF3/8 in
D20.630 in
L10.512 in
L21.122 in
L32.126 in
Hex11/16 in
Weight Each0.135 lb
Pieces per Package25

DOT-BRMRTS-0608

Tube OD3/8 in
Tube ID0.244 in
D1 NPTF1/2 in
D20.630 in
L10.669 in
L21.339 in
L32.126 in
Hex7/8 in
Weight Each0.178 lb
Pieces per Package25

DOT-BRMRTS-0804

Tube OD1/2 in
Tube ID0.362 in
D1 NPTF1/4 in
D20.787 in
L10.512 in
L21.260 in
L32.339 in
Hex13/16 in
Weight Each0.213 lb
Pieces per Package25

DOT-BRMRTS-0806

Tube OD1/2 in
Tube ID0.362 in
D1 NPTF3/8 in
D20.787 in
L10.512 in
L21.260 in
L32.339 in
Hex13/16 in
Weight Each0.201 lb
Pieces per Package25

DOT-BRMRTS-0808

Tube OD1/2 in
Tube ID0.362 in
D1 NPTF1/2 in
D20.787 in
L10.669 in
L21.437 in
L32.339 in
Hex7/8 in
Weight Each0.228 lb
Pieces per Package25

Specifications

General Applications
Pneumatic circuits for truck and trailers: air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories. Suitable for all air assisted applications except those designed for use between frame and axle or between towed and towing vehicles.
ConstructionBrass housing with polyethylene holding ring and nitrile (NBR) seals.
Body and ReleaseBrass UNI EN 12164 CW614N - UNI EN 12165 CW617N
SealsNBR (Low Temperature)
Holding RingResin (PEI)
Gripping ColletStainless Steel AISI 301
Protection RingResin (PEI)
TubeTube Support (in)
Recommended TubingDesigned to work with Endure™ Air Brake tubing or other tubing that complies with DOT FMVSS 106 and meets the performance requirements of SAE J844.
Temperature [Min]-50 ºC -58 ºF
Temperature [Max]100 ºC 212 ºF
Tube ID 10.165 in
Pieces per Package 225
BrandKuri Tec®
TypePush-to Connect Tee Fittings
StyleSwivel Male Branch Tee
SeriesDOT-BRMRT
Max. Pressure290 psi
Vacuum Rating29 inHg
Tubing Insertion Depth L0.642 in
Norm ReferenceANSI/ASME B1.20.3
Tightening Torque2.58 ft·lb
ThreadTube
Thread 2NPTF PTFE Coated
Assembly Instructions
Cut the tube square (with a hose cutter) making sure that there are no burrs and that the tube is round. Insert the tube into the fitting until it bottoms. Tube release While pressing on the release ring, pull the tube from the fitting. Once the tubing is connected to the fitting, make sure that the tubing is not pulled or stretched and that the minimum bend radius stated in the tubing section of this catalog is not exceeded. To prevent accidental tube release, be certain that nothing comes in contact with the release ring. Any load on the release ring may cause an unwanted disconnection.
Pieces per Package25

PDF Documents

No PDF documents.