Attributes
| Series Code | DOT-BRUNT |
|---|---|
| Category Path | Endure Dot Air Brake Fittings |
Variations (6)
DOT-BRUNT-0404
| Tube OD1 | 1/4 in |
|---|---|
| Tube ID1 | 0.165 in |
| Tube OD2 | 1/4 in |
| Tube ID2 | 0.165 in |
| D2 | 0.472 in |
| D3 | 0.472 in |
| L1 | 0.846 in |
| L2 | 1.693 in |
| Weight Each | 0.055 lb |
| Pieces per Package | 25 |
DOT-BRUNT-0606
| Tube OD1 | 3/8 in |
|---|---|
| Tube ID1 | 0.244 in |
| Tube OD2 | 3/8 in |
| Tube ID2 | 0.244 in |
| D2 | 0.630 in |
| D3 | 0.630 in |
| L1 | 1.004 in |
| L2 | 2.008 in |
| Weight Each | 0.116 lb |
| Pieces per Package | 25 |
DOT-BRUNT-0604
| Tube OD1 | 3/8 in |
|---|---|
| Tube ID1 | 0.244 in |
| Tube OD2 | 1/4 in |
| Tube ID2 | 0.165 in |
| D2 | 0.630 in |
| D3 | 0.472 in |
| L1 | 0.945 in |
| L2 | 2.008 in |
| Weight Each | 0.106 lb |
| Pieces per Package | 25 |
DOT-BRUNT-0808
| Tube OD1 | 1/2 in |
|---|---|
| Tube ID1 | 0.362 in |
| Tube OD2 | 1/2 in |
| Tube ID2 | 0.362 in |
| D2 | 0.787 in |
| D3 | 0.787 in |
| L1 | 1.063 in |
| L2 | 2.220 in |
| Weight Each | 0.184 lb |
| Pieces per Package | 25 |
DOT-BRUNT-0806
| Tube OD1 | 1/2 in |
|---|---|
| Tube ID1 | 0.362 in |
| Tube OD2 | 3/8 in |
| Tube ID2 | 0.244 in |
| D2 | 0.787 in |
| D3 | 0.630 in |
| L1 | 1.102 in |
| L2 | 2.220 in |
| Weight Each | 0.178 lb |
| Pieces per Package | 25 |
DOT-BRUNT-1010
| Tube OD1 | 5/8 in |
|---|---|
| Tube ID1 | 0.433 in |
| Tube OD2 | 5/8 in |
| Tube ID2 | 0.433 in |
| D2 | 0.945 in |
| D3 | 0.945 in |
| L1 | 1.398 in |
| L2 | 2.795 in |
| Weight Each | 0.359 lb |
| Pieces per Package | 10 |
Specifications
| General Applications | Pneumatic circuits for truck and trailers: air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories. Suitable for all air assisted applications except those designed for use between frame and axle or between towed and towing vehicles. |
|---|---|
| Construction | Brass housing with polyethylene holding ring and nitrile (NBR) seals. |
| Body and Release | Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N |
| Seals | NBR (Low Temperature) |
| Holding Ring | Resin (PEI) |
| Gripping Collet | Stainless Steel AISI 301 |
| Protection Ring | Resin (PEI) |
| Tube | Tube Support (in) |
| Recommended Tubing | Designed to work with Endure™ Air Brake tubing or other tubing that complies with DOT FMVSS 106 and meets the performance requirements of SAE J844. |
| Temperature [Min] | -50 ºC -58 ºF |
| Temperature [Max] | 100 ºC 212 ºF |
| Tube ID1 1 | 0.165 in |
| Tube ID2 2 | 0.165 in |
| Pieces per Package 3 | 25 |
| Brand | Kuri Tec® |
| Type | Push-to Connect Tee Fittings |
| Style | Union |
| Series | DOT-BRUNT |
| Max. Pressure | 290 psi |
| Vacuum Rating | 29 inHg |
| Tubing Insertion Depth L | 0.642 in |
| Thread | Tube |
| Thread 2 | Tube |
| Assembly Instructions | Cut the tube square (with a hose cutter) making sure that there are no burrs and that the tube is round. Insert the tube into the fitting until it bottoms. Tube release While pressing on the release ring, pull the tube from the fitting. Once the tubing is connected to the fitting, make sure that the tubing is not pulled or stretched and that the minimum bend radius stated in the tubing section of this catalog is not exceeded. To prevent accidental tube release, be certain that nothing comes in contact with the release ring. Any load on the release ring may cause an unwanted disconnection. |
PDF Documents
No PDF documents.