Attributes
| Series Code | K5556 |
|---|---|
| Category Path | Specialty Products |
Description
Polyurethane Lined Dry Ice Transfer Hose.
Variations (8)
K5556-08X100
| Size Code | 08 |
|---|---|
| Nominal ID | 1/2 in 12.7 mm |
| Nominal OD | 0.815 in 20.7 mm |
| Working Pressure at 70ºF (20ºC) | 300 psi |
| Standard Length Coils | 100 ft |
| Approx. Wt. per Pkg. | 15 lb |
K5556-08X300
| Size Code | 08 |
|---|---|
| Nominal ID | 1/2 in 12.7 mm |
| Nominal OD | 0.815 in 20.7 mm |
| Working Pressure at 70ºF (20ºC) | 300 psi |
| Standard Length Coils | 300 ft |
| Approx. Wt. per Pkg. | 45 lb |
K5556-12X100
| Size Code | 12 |
|---|---|
| Nominal ID | 3/4 in 19.3 mm |
| Nominal OD | 1.220 in 31.0 mm |
| Working Pressure at 70ºF (20ºC) | 300 psi |
| Standard Length Coils | 100 ft |
| Approx. Wt. per Pkg. | 33 lb |
K5556-12X300
| Size Code | 12 |
|---|---|
| Nominal ID | 3/4 in 19.3 mm |
| Nominal OD | 1.220 in 31.0 mm |
| Working Pressure at 70ºF (20ºC) | 300 psi |
| Standard Length Coils | 300 ft |
| Approx. Wt. per Pkg. | 100 lb |
K5556-16X100
| Size Code | 16 |
|---|---|
| Nominal ID | 1 in 25.4 mm |
| Nominal OD | 1.480 in 37.6 mm |
| Working Pressure at 70ºF (20ºC) | 300 psi |
| Standard Length Coils | 100 ft |
| Approx. Wt. per Pkg. | 45 lb |
K5556-16X300
| Size Code | 16 |
|---|---|
| Nominal ID | 1 in 25.4 mm |
| Nominal OD | 1.480 in 37.6 mm |
| Working Pressure at 70ºF (20ºC) | 300 psi |
| Standard Length Coils | 300 ft |
| Approx. Wt. per Pkg. | 134 lb |
K5556-20X50
| Size Code | 20 |
|---|---|
| Nominal ID | 1 1/4 in 31.8 mm |
| Nominal OD | 1.810 in 46.0 mm |
| Working Pressure at 70ºF (20ºC) | 300 psi |
| Standard Length Coils | 50 ft |
| Approx. Wt. per Pkg. | 33 lb |
K5556-20X100
| Size Code | 20 |
|---|---|
| Nominal ID | 1 1/4 in 31.8 mm |
| Nominal OD | 1.810 in 46.0 mm |
| Working Pressure at 70ºF (20ºC) | 300 psi |
| Standard Length Coils | 100 ft |
| Approx. Wt. per Pkg. | 66 lb |
Specifications
| General Applications | Dry ice blasting equipment. Transfer of low temperature materials. |
|---|---|
| Tube | Low Temperature Flexible PVC with Abrasion Resistant Polyurethane Liner. |
| Reinforcement | Two Layers of High Tensile Strength Yarn. |
| Cover | Low Temperature Flexible PVC |
| Service Temperature Range [Min] | -40 ºC -40 ºF |
| Service Temperature Range [Max] | 60 ºC 140 ºF |
| Features and Advantages | Lighter Weight - Up to 25% lighter than similar rubber hoses. Easier to use and helps to reduce worker fatigue. Abrasion Resistant Polyurethane Liner - Designed for applications where abrasion is a factor. Provides for longer hose life and lower operating costs versus rubber or all-PVC hoses. Smooth Interior - Low friction inner surface allows for maximum flow. Cold Flex™ Materials - Hose remains flexible in sub-zero temperatures. Easy Slide Cover - Ribbed cover reduces friction between the hose and ground, allowing the hose to slide easily over rough surfaces. Non-marking - PVC cover eliminates instances of floor marking that can be caused by some rubber hoses. One Piece Lengths - Available in up to 300 foot lengths, eliminating the need for hose menders. Phthalate Free! Made in North America |
| Brand | Kuri Tec® |
| Series | K5556 |
| Type | Polyurethane Lined Dry Ice Transfer Hose |
| Material | Polyurethane |
| Caution | Consult Kuri Tec® PVC chemical resistance guide for suitability. |
| Note | Working Pressure decreases as temperature increases. Pressure ratings can only be obtained with proper coupling procedures. Use of compression fitting with Kuri Tec® reinforced hose is not recommended. Hose claims involving use of these fittings will be disallowed. |
| Compliance Footnotes | Phthalate Free - Manufactured from all phthalate free materials. RoHS - The product complies with the requirements of the EU directive 2002/95/EC which is on the restriction of the use of certain hazardous substances in electrical and electronic equipment. |
| Working Pressure at 70ºF (20ºC) | 300 psi |
PDF Documents
No PDF documents.