Attributes
| Series Code | T605AA |
|---|---|
| Category Path | Kuriyama On Shore Drilling Production |
Variations (11)
T605AA075X100
| ID | 3/4 in 19 mm |
|---|---|
| OD | 1.18 in 30 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 30 inHg |
| Min. Bending Radius at 68°F | 1 1/2 in |
| Standard Length | 100 ft |
| Weight | 0.40 lbs/ft |
T605AA100X100
| ID | 1 in 25 mm |
|---|---|
| OD | 1.42 in 36 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 30 inHg |
| Min. Bending Radius at 68°F | 2 in |
| Standard Length | 100 ft |
| Weight | 0.50 lbs/ft |
T605AA125X100
| ID | 1 1/4 in 32 mm |
|---|---|
| OD | 1.69 in 43 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 30 inHg |
| Min. Bending Radius at 68°F | 2 1/2 in |
| Standard Length | 100 ft |
| Weight | 0.60 lbs/ft |
T605AA150X100
| ID | 1 1/2 in 38 mm |
|---|---|
| OD | 1.93 in 49 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 30 inHg |
| Min. Bending Radius at 68°F | 3 in |
| Standard Length | 100 ft |
| Weight | 0.70 lbs/ft |
T605AA200X100
| ID | 2 in 51 mm |
|---|---|
| OD | 2.44 in 62 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 30 inHg |
| Min. Bending Radius at 68°F | 4 in |
| Standard Length | 100 ft |
| Weight | 0.91 lbs/ft |
T605AA250X100
| ID | 2 1/2 in 63 mm |
|---|---|
| OD | 2.99 in 76 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 30 inHg |
| Min. Bending Radius at 68°F | 7 1/2 in |
| Standard Length | 100 ft |
| Weight | 1.40 lbs/ft |
T605AA300X100
| ID | 3 in 76 mm |
|---|---|
| OD | 3.50 in 89 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 30 inHg |
| Min. Bending Radius at 68°F | 9 in |
| Standard Length | 100 ft |
| Weight | 1.59 lbs/ft |
T605AA400X100
| ID | 4 in 102 mm |
|---|---|
| OD | 4.57 in 116 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 30 inHg |
| Min. Bending Radius at 68°F | 12 in |
| Standard Length | 100 ft |
| Weight | 2.29 lbs/ft |
T605AA600X20
| ID | 6 in 152 mm |
|---|---|
| OD | 6.69 in 170 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 25 inHg |
| Min. Bending Radius at 68°F | 24 in |
| Standard Length | 20 ft |
| Weight | 4.86 lbs/ft |
T605AA600X100
| ID | 6 in 152 mm |
|---|---|
| OD | 6.69 in 170 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 25 inHg |
| Min. Bending Radius at 68°F | 24 in |
| Standard Length | 100 ft |
| Weight | 4.86 lbs/ft |
T605AA800X20
| ID | 8 in 203 mm |
|---|---|
| OD | 8.86 in 225 mm |
| Max. Working Pressure | 150 psi |
| Vacuum Rating | 25 inHg |
| Min. Bending Radius at 68°F | 32 in |
| Standard Length | 20 ft |
| Weight | 7.74 lbs/ft |
Specifications
| General Applications | For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum-based products with up to 50% aromatic content |
|---|---|
| Tube | Black conductive NBR |
| Reinforcement | High tensile textile spiral cords with flexible steel helix wire |
| Cover | Black CR – abrasion, ozone and hydrocarbon resistant |
| Working Pressure | Constant Pressure – 10 Bar (150 PSI) |
| Service Temperature Range [Min] | -30 ºC -22 ºF |
| Service Temperature Range [Max] | 93 ºC 200 ºF |
| Branding | ITALY 605 EVOLUTION- 10 BAR (150 PSI) PETROLEUM -S & D Ω - SAE 100R4 (in red letters) |
| Note: Exceeds SAE100R4 | ⚠ Not recommended for use on a reel ⚠ Not recommended for gasohol / high additives ⓘ Diesel #1 or #2 are approved for use |
| Brand | Alfagomma® |
| Series | T605AA |
| Type | Petroleum, Fuel Hoses |
| Color | Black |
| Performance | 150 PSI Petroleum Suction |
| Coupling Suggestions | Quick-Acting, combination nipples attached with bands or internally expanded brass couplings with gasket seal attached with ferrules. |
| Note | Kuriyama offers a full line of Quick-Acting couplings, pin lug shank couplings and combination nipples. Refer to current Kuriyama-CouplingsTM and Accessories Catalog for type — KOA.link/KOA-Couplings-Catalog |
| Max. Working Pressure | 150 psi |
PDF Documents
No PDF documents.