Attributes
| Series Code | T341AA |
|---|---|
| Category Path | Steam Industrial Rubber Hoses |
Variations (12)
T341AA050X50
| ID | 1/2 in 13 mm |
|---|---|
| OD | 0.91 in 23 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 5 in |
| Standard Length | 50 ft |
| Weight | 0.29 lbs/ft |
T341AA050X100
| ID | 1/2 in 13 mm |
|---|---|
| OD | 0.91 in 23 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 5 in |
| Standard Length | 100 ft |
| Weight | 0.29 lbs/ft |
T341AA075X50
| ID | 3/4 in 19 mm |
|---|---|
| OD | 1.22 in 31 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 7 1/2 in |
| Standard Length | 50 ft |
| Weight | 0.53 lbs/ft |
T341AA075X100
| ID | 3/4 in 19 mm |
|---|---|
| OD | 1.22 in 31 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 7 1/2 in |
| Standard Length | 100 ft |
| Weight | 0.53 lbs/ft |
T341AA100X50
| ID | 1 in 25 mm |
|---|---|
| OD | 1.50 in 38 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 10 in |
| Standard Length | 50 ft |
| Weight | 0.62 lbs/ft |
T341AA100X100
| ID | 1 in 25 mm |
|---|---|
| OD | 1.50 in 38 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 10 in |
| Standard Length | 100 ft |
| Weight | 0.62 lbs/ft |
T341AA125X50
| ID | 1 1/4 in 32 mm |
|---|---|
| OD | 1.81 in 46 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 12 1/2 in |
| Standard Length | 50 ft |
| Weight | 0.89 lbs/ft |
T341AA125X100
| ID | 1 1/4 in 32 mm |
|---|---|
| OD | 1.81 in 46 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 12 1/2 in |
| Standard Length | 100 ft |
| Weight | 0.89 lbs/ft |
T341AA150X50
| ID | 1 1/2 in 38 mm |
|---|---|
| OD | 2.05 in 52 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 15 in |
| Standard Length | 50 ft |
| Weight | 0.97 lbs/ft |
T341AA150X100
| ID | 1 1/2 in 38 mm |
|---|---|
| OD | 2.05 in 52 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 15 in |
| Standard Length | 100 ft |
| Weight | 0.97 lbs/ft |
T341AA200X50
| ID | 2 in 51 mm |
|---|---|
| OD | 2.64 in 67 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 20 in |
| Standard Length | 50 ft |
| Weight | 1.44 lbs/ft |
T341AA200X100
| ID | 2 in 51 mm |
|---|---|
| OD | 2.64 in 67 mm |
| Max. Working Pressure | 270 psi |
| Min. Bending Radius at 68°F | 20 in |
| Standard Length | 100 ft |
| Weight | 1.44 lbs/ft |
Specifications
| General Applications | The transfer of saturated and superheated steam up to 270 PSI and max 410°F (+210°C) in shipyards, chemical plants and industrial applications ⓘProper draining of steam hose after each use will increase service life ⚠Not recommended for washdown applications where detergent or oils are present. |
|---|---|
| Tube | Black extruded CIIR - heat-resistant. Not for steam cleaner use |
| Reinforcement | Single high tensile steel wire braids (1/2" size), Two high tensile steel wire braids for 3/4" and above |
| Cover | Black EPDM - heat-resistant. Wrapped cover fabric impression. Pin-pricked cover to allow venting |
| Service Temperature Range | Saturated and Superheated Steam. Constant Operation: -40°F (-40°C) to +410°F (+210°C) Intermittent to +450°F (+232°C) |
| Branding | ALFAGOMMA - ITALY 341 18 BAR (270 PSI) STEAM - DRAIN AFTER USE - QTR/YEAR (mylar) |
| Warning | Handling steam is very hazardous. If it is not properly controlled it can cause property damage, injury or even death. Selection for the proper application, usage, and maintenance will not only increase hose life but will insure safe operation for the user. |
| Type | Steam Hose |
| Style | Braided Steam Hose |
| Brand | Alfagomma® |
| Series | T341AA |
| Color | Black |
| Coupling Suggestions | Steel or Malleable Iron Male Insert NPT or Female ground Joint or Washer Type with Spuds attached with 2 or 4 Bolt Interlocking Clamps. |
| Note | REFER TO STEAM HOSE TESTING AND INSPECTION ON PAGES 82-84. PLEASE NOTE: Drain hose after each use to avoid tube damage before house is put back in operation, to avoid "popcorning" of tube. Kuriyama offers a full line of Quick-Acting couplings, pin lug shank couplings and combination nipples. Refer to current Kuriyama-CouplingsT" and Accessories Catalog for type — KOA.link/KOA-Couplings-Catalog Universal quick-acting couplings should not be used with steam hose. |
| Max. Working Pressure | 270 psi |
PDF Documents
No PDF documents.